This report was the first of its kind to analyze the green …
This report was the first of its kind to analyze the green job market in MI (3% of workforce) through an analytical (industrial and occupational trends), qualitative (focus groups), and quantitative (employer survey) approach. Discussed are Michigan's green related industries and occupations, and also tracking them. It's concluded that the MI green job market has further potential and is growing despite an economic downturn.
This resource contains presentations from one of the Center for Automotive Research's …
This resource contains presentations from one of the Center for Automotive Research's (CAR's) breakfast briefings titled "Automotive Fuels and Emissions: Policies, Compliance, & Potential Impact of Future Technologies." This briefing occurred on 12/5/13 at Robert Bosch LLC in Farmington Hills, MI. At the briefing presenters discussed the strategic implications of Tier 3 regulations which will soon be finalized and may impact future technology decisions in a multitude of ways. The impact of Tier 3 emission regulations is expected to be far reaching as they have the potential to influence the quality of fuel, as well as usage of alternative fuels and powertrains. Further, the regulations will have a direct influence on the technologies, such as diesel and gasoline direct injection, that automakers will utilize to meet the fuel economy standards through MY2025. Included in this resource are the presentations from the National Renewable Energy Laboratory (NREL), Volkswagen, and Bosch utilized at the briefing.
This resource contains presentations from the Center for Automotive Research (CAR) 2013 …
This resource contains presentations from the Center for Automotive Research (CAR) 2013 Management Briefing Seminars held August 5-8, 2013. With over 900 attendees from industry, government, media, and academia, the event featured outstanding presentations from industry thought leaders as well as various networking and social events. Using CAR research as a foundation, these seminars revolved around global manufacturing strategies, lightweighting, connected vehicles, powertrain developments, sales forecasting, purchasing, policy, designing for technology, and capital investment.
The following course was created by Grand Rapids Community College (GRCC), through …
The following course was created by Grand Rapids Community College (GRCC), through seed funding from theCAAT, to train workers for entry level positions in the advanced energy manufacturing industry. The course is designed around OSHA's "Standards for General Industry" and if taught by an authorized General Industry Outreach Training Program Instructor, students should receive an OSHA General Industry 30-hour Safety certification. Instructional materials include PowerPoint presentations, instructor notes, OSHA instructor and student manuals (handouts/assignments), and lesson objectives. All lessons are intended to be taught through PowerPoint presentations with guidance from the included lesson objectives and notes for instructors. The included PowerPoints are original OSHA presentations modified by GRCC and originals created by GRCC. The lesson topics are: Introduction to OSHA Safety and Health Programs, Hazard Mapping, Personal Protective Equipment, Exit Routes and Emergency Action Plans, Fire Protection and Prevention, Electrical Hazards, Ergonomics and Manual Material Handling, Walking and Working Surfaces, Industrial Hygiene, Flammable and Combustible Liquids Hazard CommunicationExit Routes and Emergency Action Plans, Fire Protection and Prevention, First Aid and CPR, Hand and Power Tool Safety, Machine Guarding, and Control of Hazardous Energy (Lockout/Tag-out).For more information on the course visit https://learning.grcc.edu/ec2k/CourseListing.asp?master_id=777&course_area=CEMF&course_number=102&course_subtitle=00.
The following module consists of a PowerPoint presentation, two lab sheets, and …
The following module consists of a PowerPoint presentation, two lab sheets, and a syllabus for modifying automotive engine courses to include HEV technologies and was developed through a seed grant from the CAAT. The PowerPoint discusses the application of variable valve timing (VVT) and Atkinson cycle principals to HEVs, and the extra hydrocarbon capturing devices added to HEVs due to the use VVT and Atkinson principles. The lab "Compression Testing VVT systems" reinforces the ideas of the presentation illustrating engine malfunctions caused by a faulty VVT system. For additional insight on HEV engine service procedures, an oil change lab sheet for HEVs is included. For educators looking to modify current courses, the syllabus has highlighted fields where HEV technologies were incorporated to an engines course at Lewis and Clark Community College.
Project-based course on the design of mechatronic devices to address needs identified …
Project-based course on the design of mechatronic devices to address needs identified by hospital-based clinicians and industry. Students work in teams to develop a mechatronic prototype. The lectures will cover the design of medical devices and robotics including sensors, actuators, and robots. The students will communicate with customers to understand design needs, then conduct study on prior art, intellectual property, due diligence, and idea conceptualization. Students will present ideas in class and to a broad audience from local industry. Students will also write a publication-quality final report, which they will be encouraged for publication submission.
These modules were originally presented to First Responders during a two-day workshop …
These modules were originally presented to First Responders during a two-day workshop at the North Carolina Solar Center (now known as the North Carolina Clean Energy Technology Center) and were taught by National Alternative Fuels Training Consortium trained instructors. Three separate modules were used to educate them on the properties, technology, and safety precautions to take when working with alternative fuel vehicles utilizing gaseous fuels, biofuels, and electric drivetrains.
A concise fact sheet on aluminum use in transport by the European …
A concise fact sheet on aluminum use in transport by the European Aluminium Association (EAA). Topics include applications (auto, air, marine, and rail), benefits, economic role, energy consumption, history, and sustainability.
This report by The Aluminum Association reviews the North American use of …
This report by The Aluminum Association reviews the North American use of aluminum over the past 20 years in order to improve industry emissions, efficiency, recycling, and to address the challenges ahead in regards of sustainability. Challenges faced with sustainability include technological progress, energy and resource use, waste minimization and elimination, business operations, and product end-of-life ("design for recycling" and recycling incentives).
This study was carried out by Ducker Worldwide and funded by The …
This study was carried out by Ducker Worldwide and funded by The Aluminum Association to evaluate the aluminum content in 2012 model year vehicles and the projected aluminum content growth through 2025. To gather data and form projections, Ducker surveyed original equipment manufactures (OEMs) and The Aluminum Association to create a metallic materials database with 32,000 cells per light vehicle. Using their database and other information from OEMs, Ducker concluded in the 2012 model year the average weight of aluminum on light vehicles will be approximately 348lbs, 30% of hoods will be aluminum, and 50% of cast aluminum wheels will be sourced from China. To meet corporate average fuel economy (CAFE) standards in 2025 Ducker speculates vehicle aluminum content will grow by 80% (671lbs avg. truck and 451lbs avg. for cars), milled aluminum components will increase, 50% of hoods will be aluminum, and manifolds will be made from magnesium rather than aluminum. Based on this study's conclusions, it's clear that aluminum content in vehicles will continue to grow to meet CAFE standards by 2025. For more info on Ducker Worldwide, visit http://www.ducker.com/. Ducker has also performed studies for the Environmental Protection Agency (EPA) and the Department of Energy (DOE).
In this study funded by the Energy Foundation, performed by Lotus Engineering, …
In this study funded by the Energy Foundation, performed by Lotus Engineering, and released by the International Council on Clean Transportation (ICCT), the potential mass reduction of a 2009 Toyota Venza is evaluated. Through advanced methodologies, Lotus replaces components with various high strength materials and reduces the quantity of components through integration. It's concluded in low development 21% mass may be reduced while cost is kept to 98% and in high development 38% mass may be reduced while cost is kept to 103%.
Crea un dispositivo volador Magnus. Aprenda cómo las jugadas de béisbol y …
Crea un dispositivo volador Magnus. Aprenda cómo las jugadas de béisbol y fútbol pueden curvar la trayectoria de la pelota. Actividad de Bolsa de STEM Semanal. Agentes de Colorado Americorp en los condados de Araphahoe, Denver, Garfield, Larimer y Weld. Trabajo apoyado por la Corporación para el Servicio Nacional y Comunitario bajo el número de subvención 18AFHCO0010008 de Americorps. Las opiniones o puntos de vista expresados en esta lección pertenecen a los autores y no representan necesariamente la posición oficial o una posición respaldada por la Corporación o el programa Americorps.
Haz tu propio bálsamo labial. Actividad de Bolsa de STEM Semanal. Agentes …
Haz tu propio bálsamo labial. Actividad de Bolsa de STEM Semanal. Agentes de Colorado Americorp en los condados de Araphahoe, Denver, Garfield, Larimer y Weld. Trabajo apoyado por la Corporación para el Servicio Nacional y Comunitario bajo el número de subvención 18AFHCO0010008 de Americorps. Las opiniones o puntos de vista expresados en esta lección pertenecen a los autores y no representan necesariamente la posición oficial o una posición respaldada por la Corporación o el programa Americorps.
Learners examine the basic types of dimensioning including unidirectional and aligned systems, …
Learners examine the basic types of dimensioning including unidirectional and aligned systems, and linear, aligned, angled, arrowless, chain, datum, chart, tabular, radius, diameter, typical, and reference dimensions.
This presentation by Bob Feldmaier of the Center for Advanced Automotive Technology …
This presentation by Bob Feldmaier of the Center for Advanced Automotive Technology (CAAT) was presented at the 2013 conference Manufacturing the Nextgen Workforce and provides an overview of the CAAT. Discussed in the presentation are the CAAT's mission and strategic priorities, affiliations, Macomb Community College's (MCC's) automotive programs, and potential career pathways. This conference was hosted by Clemson University's science, technology, engineering, and math (STEM) Workforce Development group and took place from 9/30/13 to 10/2/13 at the Charleston Area Convention Center in North Charleston, SC. This conference also featured presentations from other Advanced Technological Education (ATE) centers and educational institutions.
In this two year study funded by the California Energy Commission and …
In this two year study funded by the California Energy Commission and S.D. Bechtel, a committee of individuals from major energy research institutions in California develops strategies to meet Executive Order S-3-05. Executive Order S-3-05 requires California to reduce greenhouse gas (GHG) emissions to 80% of 1990 levels by 2050. To accomplish this, CO2 levels will need to drop from 13 tons CO2e per capita (2005) to 1.6 tons CO2e per capita (2050) while the population continues to grow and energy use is expected to double. To offer a solution to this challenge, multiple "energy system portraits" are developed with combinations of nuclear, biomass, electricity, and fossil fuels with carbon capturing systems. It's concluded by applying key aggressive strategies and investing in multiple technologies, implementations, research, development, and innovation, California can meet executive order S-3-05.
Career Gates: Manufacturing is discussed by various employees of Rexroth, Just Born …
Career Gates: Manufacturing is discussed by various employees of Rexroth, Just Born Candy, Coca-Cola and Martin Guitars. Steve Morrow, General Manager of the Coca-Cola plant begins the tour, followed by Ross Born from Just Born Candy. Products highlighted are Just Born Peeps, Martin Guitars and Coca-Cola sodas. Technologies highlighted are robotics and the use of AutoCad. The last section highlights what these employers look for when evaluating employees that will be hired. ***Access to Teacher's Domain content now requires free login to PBS Learning Media.
Carros Solares Equipo STEM. El Centro de Extensión y Educación en Ciencias …
Carros Solares Equipo STEM. El Centro de Extensión y Educación en Ciencias Naturales colabora con la facultad de CSU, los Parques Nacionales y los programas de ciencia ciudadana para traducir su investigación científica actual en experiencias STEM únicas para los estudiantes en forma de kits educativos que se pueden prestar. Cada kit contiene casi todos los materiales necesarios (menos cosas comunes como agua y toallas de papel) para explorar algunos temas de investigación científica realmente interesantes. enviando un formulario de recogida local o un formulario de entrega disponible en el sitio web vinculado. Utilice la información de contacto en la página de descripción general del kit STEM para obtener más información. https://www.cns-eoc.colostate.edu/stem-kits/ Este kit se proporciona de forma gratuita para uso educativo.
Diseña una catapulta de malvaviscos. Actividad de Bolsa de STEM Semanal. Agentes …
Diseña una catapulta de malvaviscos. Actividad de Bolsa de STEM Semanal. Agentes de Colorado Americorp en los condados de Araphahoe, Denver, Garfield, Larimer y Weld. Trabajo apoyado por la Corporación para el Servicio Nacional y Comunitario bajo el número de subvención 18AFHCO0010008 de Americorps. Las opiniones o puntos de vista expresados en esta lección pertenecen a los autores y no representan necesariamente la posición oficial o una posición respaldada por la Corporación o el programa Americorps.
No restrictions on your remixing, redistributing, or making derivative works. Give credit to the author, as required.
Your remixing, redistributing, or making derivatives works comes with some restrictions, including how it is shared.
Your redistributing comes with some restrictions. Do not remix or make derivative works.
Most restrictive license type. Prohibits most uses, sharing, and any changes.
Copyrighted materials, available under Fair Use and the TEACH Act for US-based educators, or other custom arrangements. Go to the resource provider to see their individual restrictions.
