This is a fast-paced introductory course to the C++ programming language. It …
This is a fast-paced introductory course to the C++ programming language. It is intended for those with little programming background, though prior programming experience will make it easier, and those with previous experience will still learn C++-specific constructs and concepts.
Students explore the basics of DC circuits, analyzing the light from light …
Students explore the basics of DC circuits, analyzing the light from light bulbs when connected in series and parallel circuits. Ohm's law and the equation for power dissipated by a circuit are the two primary equations used to explore circuits connected in series and parallel. Students measure and see the effect of power dissipation from the light bulbs. Kirchhoff's voltage law is used to show how two resistor elements add in series, while Kirchhoff's current law is used to explain how two resistor elements add when in parallel. Students also learn how electrical engineers apply this knowledge to solve problems. Power dissipation is particularly important with the introduction of LED bulbs and claims of energy efficiency, and understanding how power dissipation is calculated helps when evaluating these types of claims. This activity is designed to introduce students to the concepts needed to understand how circuits can be reduced algebraically.
Through an overview of some of the environmental challenges facing the growing …
Through an overview of some of the environmental challenges facing the growing and evolving country of China today, students learn about the effects of indoor and outdoor air pollution that China is struggling to curb with the help of engineers and scientists. This includes the sources of particulate matter 2.5 and carbon dioxide, and air pollution impacts on the health of people and the environment.
Students are presented with examples of the types of problems that environmental …
Students are presented with examples of the types of problems that environmental engineers solve, specifically focusing on air and land quality issues. Air quality topics include air pollution sources, results of poor air quality including global warming, acid rain and air pollution, as well as ways to reduce air pollution. Land quality topics include the differences between renewable and non-renewable resources, the results of non-renewable resource misuse and ways to reduce land pollution. (Water quality is introduced in a later lesson in a separate presentation, as it is the focal point of this unit curriculum.)
This course focuses on national environmental and energy policy-making; environmental ethics; the …
This course focuses on national environmental and energy policy-making; environmental ethics; the techniques of environmental analysis; and strategies for collaborative environmental decision-making. The primary objective of the course is to help students formulate a personal theory of environmental planning practice. The course is taught comparatively, with constant references to examples from around the world. It is required of all Graduate / Professional students pursuing an environmental policy and planning specialization in the Department of Urban Studies and Planning at MIT. This course is the first subject in the Environmental Policy and Planning sequence. It reviews philosophical debates including growth vs. deep ecology, "command-and-control†vs. market-oriented approaches to regulation, and the importance of expertise vs. indigenous knowledge. Emphasis is placed on environmental planning techniques and strategies. Related topics "include the management of sustainability, the politics of ecosystem management, environmental governance and the changing role of civil society, ecological economics, integrated "assessment (combining environmental impact assessment (EIA) and risk assessment), joint fact finding in science-intensive policy disputes, environmental justice in poor communities of "color, and environmental dispute resolution. "Environmental Problem-Solving "(Susskind et al., 2017, Anthem Press), a video-enhanced eBook, provides students with full access to all the "assigned readings, faculty commentary on the readings, and examples of the best student performance on course assignments in previous years.
Students are introduced to the concepts of evolution by natural selection and …
Students are introduced to the concepts of evolution by natural selection and digital evolution software. They learn about the field of evolutionary computation, which applies the principles of natural selection to solve engineering design problems. They learn the similarities and differences between natural selection and the engineering design process.
Students learn how engineers apply their understanding of DNA to manipulate specific …
Students learn how engineers apply their understanding of DNA to manipulate specific genes to produce desired traits, and how engineers have used this practice to address current problems facing humanity. They learn what genetic engineering means and examples of its applications, as well as moral and ethical problems related to its implementation. Students fill out a flow chart to list the methods to modify genes to create GMOs and example applications of bacteria, plant and animal GMOs.
Students are introduced to the concept of simple tools and how they …
Students are introduced to the concept of simple tools and how they can make difficult or impossible tasks easier. They begin by investigating the properties of inclined planes and how implementing them can reduce the force necessary to lift objects off the ground.
This course is an introduction to software engineering, using the Java™ programming …
This course is an introduction to software engineering, using the Java™ programming language. It covers concepts useful to 6.005. Students will learn the fundamentals of Java. The focus is on developing high quality, working software that solves real problems.
The microscopic world is full of phenomena very different from what we …
The microscopic world is full of phenomena very different from what we see in everyday life. Some of those phenomena can only be explained using quantum mechanics. This activity introduces basic quantum mechanics concepts about electrons that are essential to understanding modern and future technology, especially nanotechnology. Start by exploring probability distribution, then discover the behavior of electrons with a series of simulations.
Groningen, a province in the northeast of the Netherlands, is experiencing earthquakes …
Groningen, a province in the northeast of the Netherlands, is experiencing earthquakes due to the extraction of gas. This phenomenon is called induced seismicity. But what is induced seismicity? And how can the risk to life safety and the consequences for the built environment be reduced? The Groningen situation is unique and for this reason, solutions for the built environment cannot simply be copied from abroad. To contribute to a basic understanding of the various topics in this field, knowledge lectures have been developed as Open Course Ware by a large number of scientists and practitioners.
This Open Course Ware is initiated by TU Delft in cooperation with Arup, TU Eindhoven and TNO. This public and private initiative combines engineering, architecture and management perspectives. The 30 video lectures provide conceptual knowledge of seismicity and basic seismic concepts. This knowledge is then related to the different structures and their behaviour under seismic loading. Finally, in the last theme more procedural knowledge will be outlined, related to the multidisciplinary challenges in Groningen.
Students are presented with examples of the types of problems that environmental …
Students are presented with examples of the types of problems that environmental engineers solve, specifically focusing on water quality issues. Topics include the importance of clean water, the scarcity of fresh water, tap water contamination sources, and ways environmental engineers treat contaminated water.
This activity is designed to provide qualitative understanding of the Work-Energy Theorem. …
This activity is designed to provide qualitative understanding of the Work-Energy Theorem. Students are expected to have read introductory material regarding the theorem, and are tested on this with a short online quiz prior to class. After a brief discussion a "warm-up" demonstration is conducted with student participation. A question is then posed regarding the height a "Hopper Popper" will reach if launched from a thumb instead of a hard flat surface. After initial responses are presented, discussion groups are formed to achieve consensus and provide justification of conclusions. This is followed by a confirming demonstration with surprising results.
This activity guides students through making a simple circuit and writing a …
This activity guides students through making a simple circuit and writing a simple Arduino sketch (code) to make some LEDs blink. It precedes a lab where students build a temperature sensor, and could be used prior to any lab that has students build Arduino-based environmental sensors. Instructions are complete enough so an instructor with no previous Arduino experience can implement this activity.
Students learn about the current applications and limitations of 3D bioprinting, as …
Students learn about the current applications and limitations of 3D bioprinting, as well as its amazing future potential. This lesson, and its fun associated activity, provides a unique way to review and explore concepts such as differing cell functions, multicellular organism complexity, and engineering design steps. As introduced through a PowerPoint® presentation, students learn about three different types of bioprinters, with a focus on the extrusion model. Then they learn the basics of tissue engineering and the steps to design printed tissues. This background information prepares students to conduct the associated activity in which they use mock-3D bioprinters composed of a desktop setup that uses bags of icing to “bioprint” replacement skin, bone and muscle for a fictitious trauma patient, Bill. A pre/post-quiz is also provided.
Students are introduced to the basic principles behind engineering and the types …
Students are introduced to the basic principles behind engineering and the types of engineering while learning about a popular topic - the Olympics. The involvement of engineering in modern sports is amazing and pervasive. Students learn about the techniques of engineering problem solving, including brainstorming and the engineering design process. The importance of thinking out of the box is stressed through a discussion of the engineering required to build grand, often complex, Olympic event centers. Students review what they know about kinetic and potential energy as they investigate the design of energy-absorbing materials, relating this to the design of lighter, faster and stronger sporting equipment to improve athletic performance and protect athletes. Students consider states of matter and material properties as they see the role of chemical engineering in the Olympics. Students also learn about transportation and the environment, the relationship between architecture and environment, and the relationship between architecture and engineering.
This course introduces students to the fundamental concepts of physical computing systems …
This course introduces students to the fundamental concepts of physical computing systems through hands-on, real-life applications. Physical computing forms the basis of smart devices, wearables like smart watches, e-textiles / fashion, IoT (Internet of Things) devices, and hardware start-up
This course teaches students to design electronic devices that interact with the physical world by building circuits and developing software algorithms that run on a microcontroller. These devices will also be connected to the internet so they can send sensor data to dashboards and be remotely operated from a computer or mobile device.
This course is designed specifically for university undergraduate students from all majors. It presumes no in-depth knowledge of physics or math nor prior experience with electronics. The only expected prerequisite knowledge is introductory experience with procedural programming (i.e. variables, functions, loops).
Students learn about video motion capture technology, becoming familiar with concepts such …
Students learn about video motion capture technology, becoming familiar with concepts such as vector components, magnitudes and directions, position, velocity, and acceleration. They use a (free) classroom data collection and processing tool—the ARK Mirror—to visualize and record 3-D motion. The Augmented Reality Kinematics (ARK) Mirror software collects data via a motion detector. Using an Orbbec Astra Pro 3D camera or Microsoft Kinect (see note below), students can visualize and record a robust set of data and interpret them using statistical and graphical methods. This lesson introduces students to just one possible application of the ARK Mirror software—in the context of a high school physics class. Note: The ARK Mirror is ported to operate on an Orbbec platform. It may also be used with a Microsoft Kinect, although that Microsoft hardware has been discontinued. Refer to the Using ARK Mirror and Microsoft Kinect attachment for how to use the ARK MIrror software with Microsoft Kinect.
Being able to recognize a problem and design a potential solution is …
Being able to recognize a problem and design a potential solution is the first step in the development of new and useful products. In this activity, students create devices to get "that pesky itch in the center of your back." Once the idea is thought through, students produce design schematics (sketches). They are given a variety of everyday materials and recyclables, from which they prototype their back-scratching devices.
Students observe how water acts differently when placed on hydrophilic and hydrophobic …
Students observe how water acts differently when placed on hydrophilic and hydrophobic surfaces. They determine which coatings are best to cause surfaces to shed water quickly or reduce the "fogging" caused by condensation.
No restrictions on your remixing, redistributing, or making derivative works. Give credit to the author, as required.
Your remixing, redistributing, or making derivatives works comes with some restrictions, including how it is shared.
Your redistributing comes with some restrictions. Do not remix or make derivative works.
Most restrictive license type. Prohibits most uses, sharing, and any changes.
Copyrighted materials, available under Fair Use and the TEACH Act for US-based educators, or other custom arrangements. Go to the resource provider to see their individual restrictions.
